How to find Synology default username and password?

Synology default username and password
Synology default username and password

How to find Synology default username and password?

The default username and password for Synology devices are:

– Username: Admin

– Password: Admin

Note: Some Synology devices may have a default password, which is usually “Admin” or ” Admin “. If you’re unsure, check the device’s documentation or contact Synology support.

After logging in with the default credentials, it’s highly recommended to change the password to secure your device and network.

Additionally, if you’ve forgotten your Synology device’s password, you can:

– Check the device’s documentation for a Synology default username and password or reset instructions

– Contact Synology support for assistance

– Perform a factory reset (which will erase all settings and data)

Remember to always use strong and unique passwords for your devices and accounts!

Steps to reset Synology admin password without losing data

To reset the admin password on a Synology device without losing data, follow these steps:

1: Using the Synology Assistant Software

  1. Download and install Synology Assistant on your computer.
  2. Launch the software and select the Synology device.
  3. Click on “Reset administrators Password” and follow the options.
  4. Enter a new admin password and confirm.
  5. Click “Apply” to save the changes.

2: Using the Synology Web Interface

  1. Access the Synology web interface (http://<device_IP>).
  2. Click on “Control Panel” and after that “User Account”.
  3. Select the administrators account and click on “Edit”.
  4. Click “Reset Password” and enter a new password.
  5. Confirm the new password and click “Apply”.

 3: Using the Command Line Interface (CLI)

  1. Connect to the Synology device using SSH (e.g., PuTTY).
  2. Run the command synouser –resetpw admin (replace “admin” with the actual username).
  3. Enter a new password and confirm.

In all cases, make sure to:

– Use a strong and unique password

– Store the password securely

– Avoid using the same password for multiple accounts

Resetting the admin password will not affect your data or settings. However, if you’re still concerned, consider backing up your data before making any changes.

How to find Synology Router default ip

The default IP address for Synology routers is:

(192.168.0.254)

or

(192.168.1.254)

Try accessing the Synology router’s web interface using one of these IP addresses in a web browser. If you’re unable to access the router, ensure:

  1. You’re connected to the same network as the router.
  2. The router is powered on and functioning correctly.
  3. You’re using the correct IP address (check the router’s documentation or underside for the default IP).

Once logged in, you can change the IP address, configure settings, and manage your network.

Note: If you’ve changed the default IP address and forgotten it, you may need to reset the router to its default settings. Consult the user manual or contact Synology support for assistance.

Synology router default wifi password

The default Wi-Fi password for Synology routers varies depending on the model. However, for most Synology routers, the default Wi-Fi password is:

Synology wifi

or

0123456789

Check the underside of your router or the documentation that came with it for the specific default Wi-Fi password. If you’re still unsure, try the following:

  1. Check the router’s web interface (usually (192.168.254) for the Wi-Fi password settings.
  2. Refer to the user manual or quick installation guide.
  3. Contact Synology support for assistance.

Remember to change the default Wi-Fi password to a strong and unique password to secure your network.

Steps to get Synology router password recovery

To recover a forgotten admin password for a Synology router:

  1. Reset the router: Press the reset button (usually on the back or bottom) for 10-15 seconds. This will restore the Synology router to its default settings, including the administrator’s password.
  2. Use the Synology Assistant software: Download and install Synology Assistant on your computer. Connect to the router and follow the prompts to reset the admin password.
  3. Use the web interface: Access the router’s web interface (http://<router_IP>) and click on “Forgot Password”. Enter the required information and follow the prompts to reset the password.
  4. Use the command-line interface (CLI): Connect to the router using SSH (e.g., PuTTY) and run the command synouser –resetpw admin (replace “admin” with the actual username).
  5. Contact Synology support: If none of the above methods work, reach out to Synology support for further assistance.

Remember to:

– Use a strong and unique password

– Store the password securely

– Avoid using the same password for multiple accounts

After recovering the password, ensure to:

– Change the administrator’s password to a new, strong one

– Update the router’s firmware (if necessary)

– Reconfigure any settings that were reset during the recovery process

Synology router password reset

To reset the password on a Synology router:

1: Web Interface

  1. Open a web browser and navigate to http://<router_IP>.
  2. Go to “Control Panel” and then “User Account”.
  3. Select the administrator’s account and click “Edit”.
  4. Click “Reset Password” and enter a new password.
  5. Confirm the new password and click “Apply”.

2: Synology Assistant Software

  1. Download and install Synology Assistant on your computer.
  2. Connect to the router and select it from the list.
  3. Click on “Reset administrator’s Password” and follow the option.
  4. Enter a new password and confirm.

3: Reset Button

  1. find the reset button on the back or bottom of the Synology router.
  2. Press and hold the reset button for 20-25 seconds.
  3. Release the button and wait for the Synology router to restart.
  4. Log in with the default admin credentials (usually “admin” for both).

Method 4: Command-Line Interface (CLI)

  1. Connect to the router using SSH (e.g., PuTTY).
  2. Run the command synouser –resetpw admin (replace “admin” with the actual username).
  3. Enter a new password and confirm.

Remember to use a strong and unique password, and store it securely. If you need further assistance, feel free to ask!

How to get Synology default password after reset

After resetting a Synology default username and password is usually:

– Username: Admin

– Password: Admin

or

– Username: administrator

– Password: administrator

or

– Username: administrator

– Password: Password

Check the router’s documentation or the underside of the device for the specific default password. If you’re still unsure, try the above combinations or contact Synology support for assistance.

Once logged in, make sure to:

– Change the administrator password to a strong and unique one

– Update the router’s firmware (if necessary)

– Reconfigure any settings that were reset during the recovery process

Remember to store the new password securely and avoid using the same password for multiple accounts. If you need further assistance, feel free to ask!